Breaking News

Decking Brisbane

5 Common Mistakes to Avoid When Installing Decking

Decking Brisbane is the most used part of your home. It’s where you’ll spend time with friends and family, and it’s also the focal point for entertaining. When it comes to building a new one or repairing an existing one, there are some things that you can do wrong that can easily be avoided. Here are some common mistakes that homeowners make when installing decking:

  1. Incorrect Spacing

Incorrect spacing is one of the most common errors when installing Decking Brisbane as it’s about the rule of thumb for spacing between each board, but this can vary depending on the type of decking you use.

For example, a typical pressure-treated wood will need more space since it’s heavier than other types of wood and has different drainage requirements.

This can lead to warping or cracking of the deck surface, which could cause slippage between boards; eventually leading them not being able to bear any weight at all!


  1. Failing to prep the ground properly

The most important thing to remember when laying decking is to make sure the ground is level. You could end up with gaps between your boards if you don’t prepare the ground properly, so it’s best to check for any buried obstacles first. If you’re unsure whether your soil is suitable or not, there are a few simple tests that can tell you where things stand. First of all, place a spirit level across each corner of the intended location and make sure there are no high points or dips in its surface—if there are, use fillers such as sand or gravel to even things out (or dig out more dirt from underneath).

Next up: check for debris on top of the ground that might cause problems later on in installation. Remove any old planks or concrete slabs before laying down new decking material; this will help keep everything neat and tidy during construction as well as improve drainage when rain falls.

  1. Underestimating the length of time required. 

The time it takes to install Decking Brisbane depends on the type of decking you are installing; the size of your deck and how many people are working on it. It is important to know that a large deck will take longer than a small one, so if you have a large project at hand, provide yourself with enough time for completion.

  1. Not getting to know your wood.

Knowing your wood is important. It will help you to better prepare for the installation, and it will also help you to know how to finish your decking. This can be particularly important with premium woods such as redwood and cedar, which need special treatment in order to last properly.

In general, the more exotic and expensive a species of wood is, the more care should be taken when installing it.

  1. Not using proper fasteners.

Use the correct fasteners for your wood. Fasteners should be used in pairs, and should be driven into your decking at a 90 degree angle to the wood. This prevents splitting and cracking.

Make sure that you use enough fasteners per board (at least 2-3 per foot) to support the weight of someone standing on it—and always use galvanized or stainless steel screws if possible!


We hope that this blog post has given you some insight into the common mistakes that people make when installing decking. We hope that you will now be able to avoid these pitfalls and have a stress-free deck installation experience.