When you’re looking to get your floors polished, there are a number of things that you need to consider. With Best Floor Polishing Adelaide service can be hired for this job, but if you want to do it yourself, it’s important that you know what you’re doing. There are many mistakes that people make when they try to polish their floors on their own, so we’ve put together a list of them here.
Using the wrong equipment
- Using the wrong equipment.
- A heavy-duty buffer is necessary for removing heavy scratches and wear, as well as restoring the original lustre of your floor.
- Make sure to use a quality pad for your floor polisher, as well as an abrasive that’s appropriate for its condition.
- Also, be sure to use the correct speed of rotation while sanding or buffing–too fast and you’ll damage your timber; too slow and it won’t work properly!
Not spreading the cleaner evenly
When polishing timber, it’s important to apply the cleaner evenly over each section of timber. When you’re applying the cleaner, don’t forget about the edges and corners! You should also make sure that all areas of your floor are covered with equal amounts of polish.
One common mistake people make is not polishing their floors regularly enough or using too much pressure when they do polish their floors. If you want your timber to shine like new again, make sure you’re not pushing down too hard on your buffer while it’s working away at removing dirt from within deep scratches in your wood grain patterning (aka “graining”).
Leaving residue on surfaces
One of the most common mistakes is to leave residue on surfaces. If you do, it will leave a dull finish and make your floors look dirty. To avoid this problem, use a soft cloth to remove any excess wax or polish that may have been left behind after polishing.
Using cheap timber abrasive
As with most things, you get what you pay for. Cheap abrasives will cause damage to your timber floors, which can lead to problems with finish and longevity. In some cases, using a more expensive brand of abrasive may not give you any better results than cheaper brands.
If you’re unsure which type of Best Floor Polishing Adelaide grit is right for your project, take some time to do some research on the internet or ask an expert in-store before making a purchase.
Not following the appropriate sanding sequence
Do not use coarse grit first. This will leave scratches on your floor and cause you to spend more time sanding. Instead, start with medium grit, followed by fine grit sandpaper, and then finish off with steel wool pads. This will give you a smooth finish that will last longer than if you had used coarser sandpaper first.
Not Hiring Professional Expert
If you are thinking of doing the floor polishing yourself, make sure that you have the right equipment and know how to use it. This is important because there are many different types of floor-finishing machines available in the market today. You can easily get confused if you don’t know which one is best suited for your floors.
Also, if you lack experience in using these machines then there is a high chance that they will damage your precious timber floors. This is where getting the Best Floor Polishing Adelaide service comes into the picture. Do not let your flooring be the victim of poor polishing. Plan for the job and do it right, or you will regret it later.
