Nothing can be more frustrating than stepping into your shower in the morning and finding that the floor is wet. While you might think that it’s just condensation from your shower that hasn’t been wiped up, if you notice it after you’ve showered, it’s more likely that your Leaking Shower Floor is due to a failure in the tiles or the grout between them. If this has happened to you, don’t worry!
What Causes A Leaking Shower Floor?
A faulty or damaged sealant is the most common cause of a leaking shower floor. The sealant keeps water from seeping through the cracks in your tile or grout. Over time, the adhesive can deteriorate, allowing water to seep through and cause damage. In some cases, the problem may be with the drain itself.
If the drain is not properly installed or sealed, it can allow water to leak through. Some materials are also more susceptible to leaks than others. For example, porcelain tiles tend to crack more easily than granite tiles. Whatever the cause of your leaky shower floor, you should contact a professional for an inspection and repair as soon as possible before any permanent damage occurs.
What To Do If Water Is Pooling Next To Your Shower Pan?
If you have a shower pan that is leaking, the first thing you need to do is identify the source of the leak. If the leak is coming from the shower head, you will need to replace the washers or gaskets. If the leak is coming from the drain, you may need to replace the drain gasket or seal. If the leak is coming from a crack in the shower pan, you will need to repair or replace the shower pan.
There are two ways to get rid of leaks on your shower floor: by fixing the leak or by replacing the floor. Repairing the leak is usually done by filling in small cracks with concrete and sealing them with silicone caulk. Replacing your entire floor with tile can be costly, but if it’s just one corner that has leaked and not an entire wall, this might be a good option for you!
How To Fix Water Damage Above The Pan?
1. Shut off the water supply to your shower.
2. Remove the showerhead, faucet handle, and any other fixtures from the shower wall.
3. Use a putty knife or similar tool to remove any caulk or sealant around the perimeter of the shower pan.
4. Inspect the shower pan for cracks or holes and repair as necessary.
5. Once the pan is repaired, re-caulk and re-seal around the perimeter, and replace any removed fixtures. Turn on the water supply, and test by spraying it against the shower floor at various points. If you see leaks, turn off the water supply again and repeat step four until you have fixed all leak sources.
Conclusion
A Leaking Shower Floor can cause serious damage to your home if left unaddressed. If you think you may leak, it’s important to act fast and contact a professional for help. In the meantime, you can do a few things to prevent further damage, like placing a bucket under the leak or covering the floor with plastic. With proper care and quick action, you can fix a leaking shower floor and avoid costly repairs down the road.
