If you live in a house with a basement, the risk of tree root blockages is high. Tree roots can often find their way into the plumbing lines and cause all sorts of problems. Fortunately, there are several ways to prevent this from happening. In this article we’ll discuss some common signs as per Plumber caroline springs that tree roots have entered your pipes and what you can do about them before they become an issue!
Drains drain slowly
When you have a slow drain, you may have tree roots in your pipes. If this is the case, the tree roots are obstructing drainage and are causing the drain to back up. You will notice that water will only slowly flow down through your drains and into the sewer system.
- Try cleaning out any buildup that might be in your pipes by pouring baking soda and vinegar down each drain as well as running hot water down them. This should help clear any blockages caused by mineral deposits or other debris .If this does not work, then you may want to hire a professional plumber for further inspection of your home’s plumbing system
/GettyImages-1004153808-de43498fc099449b94c83cde23ce5d7d.jpg "Plumber caroline springs")
Toilets won’t flush properly.
If your toilet won’t flush properly, it might be due to tree roots.
If your toilet doesn’t fill up with water, it’s a good sign that tree roots are taking up space and clogging the pipes. This can also cause toilets not to stop running after flushing or even cause them not to flush at all!
Water leaks are visible on the walls and floors of your home.
Tree roots can also cause water leaks, which can be dangerous and expensive. Water leaks can lead to mold, structural damage and even electrical damage if they aren’t taken care of immediately.
If you notice a leak in your home caused by tree roots, contact a professional plumber caroline springs as soon as possible.
Your toilet doesn’t seem securely bolted down to the floor.
- If your toilet is not securely bolted down to the floor, it can move and shift, causing damage to the floor and other pipes.
- Check the bolts (usually under or behind your toilet) to make sure they are tight. If you can’t tighten them, you may need to replace them.
- To replace a toilet: first remove any screws that hold on the tank lid; then unscrew the nuts from both sides of its base; lift off the tank lid with care so as not spill water inside; pull out its old wax ring (a gasket-like ring made from rubber) from between its flange (bottom part) and bowl (top part); use plumber’s putty around new ring’s flange lip before replacing new ring back into place; then screw in new nuts on both sides of new base until nice and tight again so there’s no gap along bottom edge where water can leak through between floor & wall
Conclusion
It can be difficult to know for sure whether or not you have a tree root problem, especially if you don’t live in an area with a lot of trees. But if you think your pipes may be damaged by tree roots, it’s worth having them checked out by a plumber caroline springs. If the damage is severe enough and your pipes are still under warranty, contacting the manufacturer may also be an option.
